classictbird.com
  • Home
  • |
  • My Account
  • |
  • Login
  • |
  • View Cart
Brakes  /  Disc Brakes

Combination Valve for Disc Brake Set Up

Item Number: 2B257K
Combination Valve for Disc Brake Set Up
 Review Average:  
 Number of Reviews: 1
 View Reviews

Will be shipped via: ACTUAL CHARGES OVERSIZE OR DROPSHIP (ESTIMATED)
Vehicle Voltage 55 6volt
12 volt
manual or Power Brakes
Price: Starting at $198.00
Quantity 
 
 
 Detailed Description
This kit is designed to hook right up to CASCO disc brakes. We do not sell this combination valve for use with other disc brake kits per agreement with the manufacturer.
If you can’t get fluid to the rear, crack open the front line and slowly bleed the brakes making the valve think that a front line is broken. It's best to use is a vacuum bleeder that pulls the fluid through the valve. Then it won’t trip thinking that there is a broken line.
Manufacturer suggests not using DOT5 fluid (Silicone) because of potential leak developing under the black cap on the front. Instead use DOT3
The same combination valve is used in all of our combination valve kits.  The difference is in the brake lines supplied with the kit.

Install Directions Manual

Install Directions Power


 Product Reviews
A Safety necessity for a Driver T-Bird
This brings the safety of your car up to current standards. Many circa YTK vehicles use this exact system. Mounts very close to the exhaust manifold but I fabricated a heat shield using the through mounting bolts of the valve to the battery protection cover to keep heat away from the valve. No problems at all!
- Glenn Perry, HI
 




  • About Us
  • |
  • Classified Ads
  • |
  • Contact Us
  • Full Site
Order Management System powered by MOM and SiteLINK7