Fan Kit - Electric - 12 Volt - 1 Per car

High output racing fan delivers 1810 CFM @ 10.2 amps.
Fan is 2.9" thin.  12 Month Factory Warranty
The thermostat has been calibrated to turn the fan on at just over 170°F. To have the thermostat turn the fan on at a lower temperature, turn the adjusting screw slightly counterclockwise. To have the thermostat turn the fan on at a higher temperature, turn the adjusting screw slightly clockwise.
The fan goes between the condenser and the radiator. In some cases, more room between the radiator and the condenser is needed for the fan assembly. If so, remount the condenser toward the grill. Usually the condenser is mounted with thin straps of metal. We replace these with bent metal straps that move the condenser forward. Our part number 8600D is a set of four bent straps to do just that on the little birds.
The fan kit bolts to the front of the original radiator support (aka front body support) bracket.  The bolt pattern is 22.125" left to right and 4" up and down.  The center of the fan is even with the lower bolt holes.  The height of the fan is 15.75"

Knowledge Base

Install Directions